Bars / Barbells

Stock your rack with Olympic barbells, specialty bars, and training bars from XMARK, Muscle D Fitness, Barbell Standard, PRx Performance, Synergee, and Body-Solid — covering men's 20 kg and women's 15 kg IWF training bars, power bars, EZ curl bars, trap/hex bars, safety squat bars, Swiss multi-grip bars, and technique bars. Compare shaft diameter, knurl, tensile strength, bushing vs bearing sleeves, and whip to match powerlifting, Olympic lifting, or general strength training.

Bars / Barbells

49 products

Clear all

Compare Popular Bars / Barbells

Specs

Product not found

Product not found

Product not found
XMARK Voodoo 7ft Olympic Weightlifting Bar

XMARK

XMARK Voodoo 7ft Olympic Weightlifting Bar

$189.00
View product →
Barbell Standard 2000 Power Barbell

Barbell Standard

Barbell Standard 2000 Power Barbell

$210.00 $300.00
View product →
Synergee Hex Trap Bar

Synergee

Synergee Hex Trap Bar

$64.95
View product →
Synergee EZ Curl Bars

Synergee

Synergee EZ Curl Bars

$69.95
View product →

Product not found

Category Olympic Bar Olympic Bar Technique Bar Olympic Bar Power Bar Trap / Hex Bar EZ Curl Bar Tricep Bar
Best For CrossFit + Olympic lifting Weightlifting programs Form / technique practice Olympic lifting (dual spec) Powerlifting (squat, bench, DL) Deadlifts, shrugs, farmers Biceps, triceps, forearms Tricep extensions, close-grip
Bar Weight 15 / 20 kg 15 / 20 kg 15 lb (6.8 kg) 45 lb (20 kg) 44 lb (20 kg) 7 / 20 / 25 kg 19 lb (8.6 kg) 25 lb (11.3 kg)
Bar Length 79 / 86 in 79 / 87 in 69.5 in 7 ft (84 in) 86.6 in 49 / 56 in 47.2 in 34 in
Shaft Diameter 25 / 28 mm 25 / 28 mm 28 mm 28 mm 28.5 mm Various 28 mm 28 mm
Tensile Strength 190,000 PSI 190,000 PSI Aluminum 185,000 PSI 206,000 PSI Heavy-duty steel Steel Steel
Max Load 1,500 lb 1,500 lb 200 lb 1,500 lb 2,000 lb 500–750 lb 450 lb 200 lb
Knurling Dual IPF/IWF marks Dual IPF/IWF marks Light Medium, dual IPF/IWF Medium-light + center None (smooth grip) Full-length Full-length
Bearings / Bushings 10 needle bearings Bushings None Bushings Bronze bushings Rotating sleeves Bushings Bushings
Shaft Finish Red, Black, Pink Multiple colors Black / Red / Silver Black manganese Bright zinc Black phosphate Chrome / Phosphate / Cerakote Chrome / Phosphate / Cerakote
Loadable Sleeve Length 13 / 16.4 in 13 / 16.4 in 8 in Olympic std 16.25 in 10 in 6.25 in 6.5 in
Drop Tolerant ✓✓—✓✓✓——

Frequently asked questions

What barbell should I buy for a home gym?

For most home lifters, a quality 20 kg (45 lb) Olympic barbell with a 190,000+ PSI tensile strength rating is the sweet spot. Homegrown Lifting USA and Barbell Standard bars in this class handle 1,000+ lb, feature dual knurl marks for powerlifting and Olympic lifting, and cost $200–400. Commercial facilities should look at competition-grade bars with 215,000+ PSI ratings.

What's the difference between Olympic, power, and deadlift bars?

Olympic barbells (men's 20 kg, women's 15 kg) are the versatile standard — moderate whip, dual knurl marks, center knurl, bushings or bearings for smooth sleeve rotation. Power bars are stiffer (less whip) and designed for heavy squats and bench press — typically 29 mm shaft with aggressive knurl. Deadlift bars are longer and thinner (27 mm) with more whip, letting the bar flex off the floor to start the pull higher. For a single bar, go Olympic.

What about EZ curl, trap, and specialty bars?

Specialty bars round out a free-weight setup: EZ curl bars reduce wrist strain on curls and tricep extensions, trap/hex bars put you inside the bar for safer deadlifts and farmer carries, and safety squat bars, cambered bars, and log bars address specific training goals. See our full Bars collection for all options.

What do tensile strength and PSI ratings mean?

Tensile strength (measured in PSI or MPa) is how much force the bar can handle before permanent deformation. 155,000 PSI is entry-level, fine for lifters under 300 lb. 190,000 PSI is the home-gym sweet spot, rated for 1,000+ lb. 215,000+ PSI is competition-grade, used in powerlifting and Olympic federations. Higher PSI means the bar can handle heavier loads and repeated drops without bending.

Bushings vs. bearings — does it matter?

Yes, depending on how you lift. Bushings (usually bronze or composite) are cheaper, durable, and produce moderate sleeve spin — perfect for powerlifting and general training. Needle bearings produce fast, smooth sleeve rotation — essential for Olympic lifts (cleans, snatches) where the bar needs to spin freely as you catch it. Most home lifters are fine with bushings; dedicated Olympic lifters want bearings.

Can barbells rust, and how do I take care of one?

Bare steel bars can rust if left in humid environments (garages, basements). Options to prevent this: black oxide (affordable, mild rust resistance, needs light oiling), zinc (moderate resistance, common on commercial bars), chrome (good resistance, slight knurl softening), and Cerakote or stainless (best rust resistance, premium pricing). Wipe the bar down after sweaty sessions and oil the shaft every 1–3 months.

Free Weight Training Guides